Installing the Correct Blinds or Shades

But working with a designer or even a consultant from your local home improvement center can help clarify your ideas and maybe keep them from mushrooming into an unnecessarily complicated or fussy project. These specialists work with the products and understand their value and limitations. They can add practical suggestions that will enhance your choices.

Personality plus: Different types of window coverings convey different personalities, so you might think about using old-fashioned and comfortable drapes in a bedroom; efficient mini-blinds in a kitchen; warm wood blinds in an office or study and inviting vertical blinds over a sliding patio door. You can get ideas in any home magazine or consult a designer for help clarifying your needs for each room.

Mounts: Blinds or shades can be mounted either inside or outside of your window frame. An inside frame makes for a cleaner look because the blinds will be flush against the wall and also seals the opening better for insulation. An outside mounted blind or shade sticks out from the wall. Some window frames are too narrow to allow an inside mount, so make sure you have enough space for them.

Shade features: Shades and blinds come with a wide variety of special features. Take a look at the following list and see if any of these "extras" catch your eye. Top down/bottom up is how a blind opens. "Top down" is when the top of the blind opens first and then moves down the window with the blind gathering at the bottom of the sill. "Bottom up" is the more standard approach the blind opens first on the bottom and then moves up to the top of the sill.

Remote control is a popular option. Most shades are opened by pulling on a string. Remote controls take all the manual work out of opening and closing windows by adding a motor to the shade.

Cord loops are another way of opening shades that are ideal for larger shades. The continuous loop eliminates the need to gather the cord when you open a shade. Cord loops tend to be more durable and stronger than a standard cord pull.

An extension bracket is a mounting that extends a blind past the frame of a window. You usually find this on outside mounts for vertical blinds.

Hold down clips are a nice little feature that are usually available on all blinds to keep them from flying around and often used for doors.

Two blinds on one headrail are often used with multi-unit windows that have more than one window sitting side-by-side. Designers created this "two blind" feature so that the individual blinds that are covering each window have a common valance. This makes the window treatment look like a singular unit.

Valance is a piece of material that runs across the top of the headrail. It's a common feature of most window treatments because it gives the blind or shade a "finished" look. Room darkening is a feature found on cellular shades that will completely black out all light from outside. The other common style with cellular shades is "light-filtering." This screens out the harsh glare of the sun but still allows light to filter through. Privacy is a nice feature on mini blinds. It hides the holes normally found in the blinds so that no light comes through when the shades are closed. The slats even close tighter, which gives the blinds a very sleek look.