What's your project?
Whear?
Articles & Advice > All Painting & Staining Articles > How to Prepare for Interior Paint

How to Prepare for Interior Paint

Painting & Staining

Related Content

Find Top-Rated Professionals

For any home improvement project to be successful, you need proper preparation. There's nothing worse than skipping a crucial step, taking multiple trips to the store, or making stupid mistakes because you're in a hurry. The job will go faster if you simply take some time and make a thorough checklist. This is especially true for interior painting. Many people get in a rush because it's a boring job we want done quickly, so we end up slapping it on before taking the correct paint prep steps. If you want to avoid the chore, hire a professional painter who comes with their own supplies and training. But whether you hire a pro or do it yourself, make sure you follow this paint prep tutorial.

Interior Painting: The Tool Checklist
To avoid trips to the store, buy everything at once. Here's a list of tools you'll need:
Applicators: Rollers are best for large areas of interior painting; however, you'll also need small brushes. Buy an angled trim brush (2") for baseboards and a smaller brush (1") for window and door trim. A trim edger comes in handy: it looks like a sponge with little wheels that you set on the trim and slide along the edge with no mess. However, you still may need to touch up with a small brush. And don't forget the paint pan and the screen to squeeze off excess paint: too much on the applicator makes the project tougher.
Paint: Always purchase top-quality products. A gallon covers 400 square feet and you'll want to apply two coats, so make sure you have enough. A primer coat is for covering dark colors with lighter ones but avoid expensive prices. Latex is often used in interior painting because it's easy to clean. It's available in flat and low-gloss (for less popular rooms) and also comes in glossy (for busy rooms that require routine cleaning). They also contrast well: glossy trim (since it tends to draw fingerprints) against a flat-finish wall creates a nice look. And oil-based paints are great for humid rooms since it has a hard, enamel finish.
Other: Besides the essentials, here are a few other tools that you'll need to have around beforehand: a stirrer, pry bar or screwdriver, respirator or mask, sponges and household cleaner, spackle and sandpaper, old clothes to wear, and of course, a drop cloth.

Protective Paint Prep
Move everything away from the walls. Push the furniture to the middle of the room and cover it with a drop cloth. Remove paintings, pictures, and light switch covers. You may even want to eliminate the hardware (hinges or doorknobs) to create less hassle. If you're coating the ceiling, get rid of light fixtures or at least cover them as best you can. Next, vacuum the floors, clean the corners, and cover the ground with a large drop cloth to avoid drips. As you paint, keep a window cracked for ventilation, keep away pets and kids to avoid mishaps, and create paths for easy maneuvering to nearby sinks or exits.

Experience the difference of a fresh coat of paint! Use this link to
Hire a Painter

Taping a Room
It's essential to mask off what can't be moved. When taping a room, mask around radiators and trim. Put a piece of tape over electrical outlets for safety purposes. You could also tape the baseboards, but it may be easier to temporarily remove them from the wall (but make sure you're able to re-install them later). And mask off the corners between the walls and ceiling: often referred to as "cutting in," you may want to use a small angled brush to get into these crevices without incident.

Clean and Repair
Before you start the interior painting, make sure to wash the walls so as to remove any dirt, dust, or film that could prevent proper application. You can use a simple household cleaner for this task, just make sure to rinse afterwards and let the surface dry. Paint will not cover cracks or holes. Therefore, with some spackle or drywall compound, try to cover up imperfections and let them dry—and you may need to sand these areas afterwards in order to smooth out the surface. This is also a good opportunity to repair other problems: get some wood filler to fix holes in baseboards, re-caulk the edging, or maybe replace old-fashioned trim with new material.

Marc Dickinson has worked in both the general contracting and landscaping trades and is currently a home improvement freelance writer with over 300 articles published.

Rate This Article

OVERALL RATING

YOUR RATING

Very PoorPoorFairGoodVery Good

Log-in to save your ratings!

Recommend This Article
Digg This Digg
Submit to Reddit Reddit
Bookmark This Del.icio.us
ServiceMagic Articles To-Go

Add to Google

Add to My AOL 0

What's Your Project?

Are You a Quality Pro? Contractors Join Here
By using ServiceMagic you agree to our Terms & Conditions
SUBJECT GUIDES: Plumbers | Electricians | Kitchen Remodeling
FOR HOMEOWNERS: Categories | Projects | Contractor Directory | Community | Tell a Friend | Blog | Refer-A-Pro | Screen-A-Pro | Guarantee | Seal of Approval
FOR CONTRACTORS: Contractor Advertising | Construction Jobs | Contractor Leads / Join Our Network
FOR OTHER NEEDS: Contractors for Your Business | Events | Care
SERVICEMAGIC SITE: Home Improvement | Log In | About Us | Contact | Help | Careers | Site Map | Articles | Galleries | Videos | Project Tools | RSS Feed | Affiliates
LEGAL: Privacy (Updated) | Terms & Conditions
INTERNATIONAL: ServiceMagic UK | Travaux | 123Devis
Follow Us on Twitter Become a Fan of ServiceMagic at Facebook Get the IPhone App for free
© Copyright 1999-2009, ServiceMagic, Inc. All Rights Reserved.
Better Homes and Gardens Member of the Better Homes and Gardens Network